Issue 317

Renner J., Berger T., Körner C.:
In situ powder height measurement as process signature for quality control in electron beam powder bed fusion
In: Additive Manufacturing 110 (2025), Article No.: 104910
ISSN: 2214-7810
DOI: 10.1016/j.addma.2025.104910
Wille L., Pfannenmüller C., Kirchner J.:
From Steady to Pulsatile Flow in Molecular Communication: Propagation of Nanoparticles in Mid-sized Arteries
In: IEEE Transactions on Molecular, Biological and Multi-Scale Communications 11 (2025), p. 531-536
ISSN: 2372-2061
DOI: 10.1109/TMBMC.2025.3608558
Xiao K., Wille L., Thalmayer A., Kirchner J., Fischer G.:
Simulation and Experimental Validation of Agglomerate Size Distribution in Ferrofluid
ACM NanoCom 2025 (Chengdu, October 23, 2025 - October 25, 2025)
DOI: 10.1145/3760544.3765648

Forstner T., Cholewa S., Drummer D.:
Enhanced Feedstock Processability for the Indirect Additive Manufacturing of Metals by Material Extrusion through Ethylene–Propylene Copolymer Modification
In: Polymers 16 (2024), Article No.: 2658
ISSN: 2073-4360
DOI: 10.3390/polym16182658
URL: https://www.mdpi.com/2073-4360/16/18/2658/pdf
Forstner T., Cholewa S., Drummer D.:
Influence of wax addition on feedstock processing behavior in additive manufacturing of metals by material extrusion
In: Progress in Additive Manufacturing (2024)
ISSN: 2363-9512
DOI: 10.1007/s40964-024-00671-4
URL: https://rdcu.be/dID9h
Forstner T., Drummer D.:
Continuous production of cellular ceramics through thermoplastic foam extrusion
SPE ANTEC 2024 (St. Louis, Missouri, March 4, 2024 - March 7, 2024)
Forstner T., Drummer D.:
Modification of foam morphology in powder extrusion molding of alumina with thermally expandable microspheres
MSE 2024 - Materials Science and Engineering Congress (Darmstadt, September 24, 2024 - September 26, 2024)
Forstner T., Drummer D.:
Understanding chemical foaming of highly filled ceramic feedstocks for injection molding
38th International Conference of the Polymer Processing Society (St. Gallen, May 22, 2023 - May 26, 2023)
In: PROCEEDINGS OF THE 38TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (PPS-38) 2024
DOI: 10.1063/5.0204509
Schlicht S., Drummer D.:
Laser-Based Additive Manufacturing of Polypropylene-Agarose Composites: Processing Properties and Compressive Mechanical Properties
38th International Conference of the Polymer Processing Society (St. Gallen, May 22, 2023 - May 26, 2023)
In: Proceedings of the 38th International Conference of the Polymer Processing Society (PPS-38), College Park, Maryland: 2024
DOI: 10.1063/5.0204523
Schlicht S., Kaufmann A., Kleffel T., Drummer D.:
Biomechanische Metamaterialien – Prozesse, Möglichkeiten und Perspektiven
38. Engelberger Kunststofftechnisches Seminar 2024 (Engelberg, March 9, 2024 - March 14, 2024)

Baumgärtner B., Rothfelder R., Greiner S., Breuning C., Renner J., Schmidt M., Drummer D., Körner C., Markl M., Hausotte T.:
Evaluation of Additively-Manufactured Internal Geometrical Features Using X-ray-Computed Tomography
In: Journal of Manufacturing and Materials Processing (2023)
ISSN: 2504-4494
DOI: 10.3390/jmmp7030095
Cholewa S., Jaksch A., Drummer D.:
Structure Development of Semi-crystalline Polymers in Laser Based Powder Bed Fusion
Antec 2023 (Denver, Colorado, March 27, 2023 - March 30, 2023)
Cholewa S., Stieglitz L., Jaksch A., Rieger B., Drummer D.:
Tailored Syndiotactic Polypropylene Feedstock Material for Laser-Based Powder Bed Fusion of Polymers: Material Development and Processability
In: ACS Applied Polymer Materials (2023)
ISSN: 2637-6105
DOI: 10.1021/acsapm.2c02112
Drummer D., Schlicht S., Greiner S.:
Additive Manufacturing of Functionalized Material Systems for Medical Applications: Potentials and Challenges in Additive Manufacturing
8th International Conference on Additive Technologies iCAT 2023 (Maribor, Slowenien, April 19, 2023 - April 22, 2023)
In: Additive Manufacturing in Multidisciplinary Cooperation and Production, Cham: 2023
DOI: 10.1007/978-3-031-37671-9_23
Greiner S., Schlicht S., Drummer D.:
Understanding geometry dependent temperature fields in laser powder bed fusion of PA12 by means of infrared thermal imaging
8th International Conference on Additive Technologies iCAT (Maribor, Slowenien, April 19, 2023 - April 22, 2023)
In: Additive Manufacturing in Multidisciplinary Cooperation and Production, Cham: 2023
DOI: 10.1007/978-3-031-37671-9_2
Hesse N., Jaksch A., Kaschta J., Groh D., Drummer D., Peukert W., Schmidt J.:
From trash to treasure in additive manufacturing: Recycling of polymer powders by acid catalyzed hydrolysis
In: Additive Manufacturing 71 (2023), Article No.: 103591
ISSN: 2214-7810
DOI: 10.1016/j.addma.2023.103591
Lotter S., Brand L., Jamali V., Schäfer M., Loos H., Unterweger H., Greiner S., Kirchner J., Alexiou C., Drummer D., Fischer G., Büttner A., Schober R.:
Experimental Research in Synthetic Molecular Communications - Part I
In: IEEE Nanotechnology Magazine (2023), p. 1-12
ISSN: 1942-7808
DOI: 10.1109/MNANO.2023.3262100
Lotter S., Brand L., Jamali V., Schäfer M., Loos HM., Unterweger H., Greiner S., Kirchner J., Alexiou C., Drummer D., Fischer G., Büttner A., Schober R.:
Experimental Research in Synthetic Molecular Communications - Part II
In: IEEE Nanotechnology Magazine (2023), p. 1-12
ISSN: 1942-7808
DOI: 10.1109/MNANO.2023.3262377
Marschall M., Cholewa S., Kopp SP., Drummer D., Schmidt M.:
Holistic Characterization of PBF-LB/P Powder Regarding Isothermal Crystallization, Rheology and Optical Properties Under Process Conditions
In: Igor Drstvensek, Snehashis Pal, Nataša Ihan Hren (ed.): Additive Manufacturing in Multidisciplinary Cooperation and Production, Cham: Springer, 2023, p. 43-52
ISBN: 9783031376702
DOI: 10.1007/978-3-031-37671-9_5
Schlicht S., Cholewa S., Drummer D.:
Process-Structure-Property Interdependencies in Non-Isothermal Powder Bed Fusion of Polyamide 12
In: Journal of Manufacturing and Materials Processing 7 (2023), Article No.: 33
ISSN: 2504-4494
DOI: 10.3390/jmmp7010033
Schlicht S., Drummer D.:
Thermal Intra-Layer Interaction of Discretized Fractal Exposure Strategies in Non-Isothermal Powder Bed Fusion of Polypropylene
EMPOrIA - International Joint Conference 2023 (Aachen, May 16, 2023 - May 17, 2023)
DOI: 10.3390/jmmp7020063
Schlicht S., Drummer D.:
Eutectic In Situ Modification of Polyamide 12 Processed through Laser-Based Powder Bed Fusion
In: Materials 16 (2023), Article No.: 2050
ISSN: 1996-1944
DOI: 10.3390/ma16052050
Schlicht S., Drummer D.:
Thermal Intra-Layer Interaction of Discretized Fractal Exposure Strategies in Non-Isothermal Powder Bed Fusion of Polypropylene
In: Journal of Manufacturing and Materials Processing 7 (2023), Article No.: 63
ISSN: 2504-4494
DOI: 10.3390/jmmp7020063
Schlicht S., Drummer D.:
Accelerated Powder Bed Fusion of Polypropylene Using Superposed Fractal Exposure Strategies
8th International Conference on Additive Technologies (Maribor, April 19, 2023 - April 22, 2023)
In: Additive Manufacturing in Multidisciplinary Cooperation and Production 2023
DOI: 10.1007/978-3-031-37671-9_1
Tischer F., Cholewa S., Düsenberg B., Drummer D., Peukert W., Schmidt J.:
Polyamide 11 nanocomposite feedstocks for powder bed fusion via liquid-liquid phase separation and crystallization
In: Powder Technology 424 (2023), Article No.: 118563
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2023.118563
Tur B., Gühring L., Wendler O., Schlicht S., Drummer D., Kniesburges S.:
Effect of Ligament Fibers on Dynamics of Synthetic, Self-Oscillating Vocal Folds in a Biomimetic Larynx Model
In: Bioengineering 10 (2023), Article No.: 1130
ISSN: 2306-5354
DOI: 10.3390/bioengineering10101130

Cholewa S., Drummer D.:
Prozessnahe simultane Bestimmung des Kristallisations- und Fließverhaltens von PA 12 im Lasersintern
Rapid.Tech 3D Druck (Erfurt, May 17, 2022 - May 19, 2022)
DOI: 10.3139/9783446475281.004
Cholewa S., Drummer D.:
Crystallization behavior under process conditions in Powder Bed Fusion of polymers
12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, DEU, September 4, 2022 - September 8, 2022)
In: M. Schmidt, F. Vollertsen, B.M. Colosimo (ed.): Procedia CIRP 2022
DOI: 10.1016/j.procir.2022.08.108
Cholewa S., Jaksch A., Drummer D.:
Coalescence behavior of polyamide 12 as function of zero-shear viscosity and influence on mechanical performance
SFF 2022 (Austin, Texas, July 25, 2022 - July 27, 2022)
Drummer D., Greiner S., Grützmacher C., Jiang F., Kleffel T., Romeis M., Schlicht S., Wolf M.:
Neue Werkstoffe und Prozesse für die additive Fertigung
In: Jahresmagazin Ingenieurwissenschaften (2022)
ISSN: 1618-8357
Open Access: https://www.wak-kunststofftechnik.de/fileadmin/downloads/7_ueber-uns/Jahresmagazin_Kunststofftechnik_2022.pdf
Greiner S., Drummer D.:
Understanding aspect ratio effects in Laser Powder Bed Fusion of polyamide 12 by means of infrared thermal imaging
12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, September 4, 2022 - September 8, 2022)
In: M. Schmidt, F. Vollertsen, B.M. Colosimo (ed.): Procedia CIRP 2022
DOI: 10.1016/j.procir.2022.08.060
Jaksch A., Cholewa S., Drummer D.:
Understanding geometry dependent part behavior of thin walled structures in powder bed fusion of polymers
12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, DEU, September 4, 2022 - September 8, 2022)
In: M. Schmidt, F. Vollertsen, B.M. Colosimo (ed.): Procedia CIRP 2022
DOI: 10.1016/j.procir.2022.08.109
Jaksch A., Spinola M., Cholewa S., Pflug L., Stingl M., Drummer D.:
Thin-Walled Part Properties in PBF-LB/P — Experimental Understanding and Nonlocal Material Model
SFF 2022 (Austin, Texas, July 25, 2022 - July 27, 2022)
DOI: 10.26153/tsw/44659
Jiang F., Drummer D.:
Analysis of UV Curing Strategy on Reaction Heat Control and Part Accuracy for Additive Manufacturing
In: Polymers 14 (2022), Article No.: 759
ISSN: 2073-4360
DOI: 10.3390/polym14040759
Jiang F., Wörz A., Romeis M., Drummer D.:
Analysis of UV-Assisted direct ink writing rheological properties and curing degree
In: Polymer Testing 105 (2022), Article No.: 107428
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2021.107428
Jiang F., Zhou M., Drummer D.:
Effects of Fumed Silica on Thixotropic Behavior and Processing Window by UV-Assisted Direct Ink Writing
In: Polymers 14 (2022)
ISSN: 2073-4360
DOI: 10.3390/polym14153107
Marschall M., Heintges C., Schmidt M.:
Influence of flow aid additives on optical properties of polyamide for Laser-Based Powder Bed Fusion
In: Procedia CIRP 111 (2022), p. 51-54
ISSN: 2212-8271
DOI: 10.1016/j.procir.2022.08.114
URL: https://www.sciencedirect.com/science/article/pii/S2212827122009970
Schlicht S., Greiner S., Drummer D.:
Low Temperature Powder Bed Fusion of Polymers by Means of Fractal Quasi-Simultaneous Exposure Strategies
In: Polymers 14 (2022), Article No.: 1428
ISSN: 2073-4360
DOI: 10.3390/polym14071428
Schlicht S., Jaksch A., Drummer D.:
Inline Quality Control through Optical Deep Learning-Based Porosity Determination for Powder Bed Fusion of Polymers
In: Polymers 14 (2022), Article No.: 885
ISSN: 2073-4360
DOI: 10.3390/polym14050885

Hesse N., Winzer B., Peukert W., Schmidt J.:
Towards a generally applicable methodology for the characterization of particle properties relevant to processing in powder bed fusion of polymers – from single particle to bulk solid behavior
In: Additive Manufacturing (2021), p. 101957
ISSN: 2214-7810
DOI: 10.1016/j.addma.2021.101957
Jaksch A., Hesse N., Schmidt J., Drummer D.:
Selektives Laserstrahlschmelzen von Polyamid 12 - Einfluss von Fließhilfsmitteln auf Verarbeitbarkeit und Bauteileigenschaften
Rapid.Tech 2021 (, June 22, 2021 - June 23, 2021)
In: Proceedings of the 17th Rapid.Tech Conference 2021
DOI: 10.3139/9783446471733.002

Hesse N., Peukert W., Schmidt J.:
Enhancement of polyamide laser sinter powder reusability by acid catalyzed hydrolysis
In: Procedia CIRP 94 (2020), p. 105-109
ISSN: 2212-8271
DOI: 10.1016/j.procir.2020.09.021

Dechet M., Goblirsch A., Romeis S., Zhao M., Lanyi F., Kaschta J., Schubert DW., Drummer D., Peukert W., Schmidt J.:
Production of polyamide 11 microparticles for Additive Manufacturing by liquid-liquid phase separation and precipitation
In: Chemical Engineering Science 197 (2019), p. 11-25
ISSN: 0009-2509
DOI: 10.1016/j.ces.2018.11.051
Dechet M., Lanzl L., Werner Y., Drummer D., Bück A., Peukert W., Schmidt J.:
Manufacturing and Application of PA11-Glass Fiber Composite Particles for Selective Laser Sintering
30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
URL: http://utw10945.utweb.utexas.edu/sites/default/files/2019/089 Manufacturing and Application of PA11-Glass Fiber.pdf
Dechet M., Lanzl L., Wilden A., Sattes MM., Drummer D., Peukert W., Schmidt J.:
Manufacturing of nanoparticle-filled PA11 composite particles for selective laser sintering
30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
Open Access: http://utw10945.utweb.utexas.edu/sites/default/files/2019/090 Manufacturing of Nanoparticle-Filled PA11 Composit.pdf
Greiner S., Lanzl L., Wudy K., Drummer D.:
A new approach for getting more homegeneous temperature fields in selective laser sintering of polymers
PPS (Polymer Processing Society) (Dresden, June 26, 2017 - June 29, 2017)
In: AIP Conference Proceedings 2055 2019
DOI: 10.1063/1.5084907
Hesse N., Dechet M., Gomez Bonilla JS., Lübbert C., Roth S., Bück A., Schmidt J., Peukert W.:
Analysis of tribo-charging during powder spreading in selective laser sintering: Assessment of polyamide 12 powder ageing effects on charging behavior
In: Polymers 11 (2019), Article No.: 609
ISSN: 2073-4360
DOI: 10.3390/polym11040609
Schmidt J., Dechet M., Gomez Bonilla JS., Hesse N., Bück A., Peukert W.:
Characterization of Polymer Powders for Selective Laser Sintering
30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
Open Access: http://utw10945.utweb.utexas.edu/sites/default/files/2019/066 Characterization of Polymer Powders for Selective.pdf
URL: http://utw10945.utweb.utexas.edu/sites/default/files/2019/066 Characterization of Polymer Powders for Selective.pdf

Drexler M., Greiner S., Lexow M., Lanzl L., Wudy K., Drummer D.:
Selective laser melting of polymers: Influence of powder coating on mechanical part properties
In: Journal of Polymer Engineering 38 (2018), p. 667-674
ISSN: 0334-6447
DOI: 10.1515/polyeng-2017-0133
Greiner S., Lanzl L., Zhao M., Wudy K., Drummer D.:
Influence of powder bed surface on part properties produced by selective laser beam melting of polymers
7th International Conference on Additive Technologies - iCAT 2018 (Maribor, October 10, 2018 - October 11, 2018)
In: Proceedings of the 7th International Conference on Additive Technologies - iCAT2018 2018
Greiner S., Soldner D., Jaksch A., Zhao M., Mergheim J., Steinmann P., Wudy K., Drummer D.:
Experimentelle und simulative Untersuchung der zeit- und ortsaufgelösten Temperaturfelder beim selektiven Strahlschmelzen von Kunststoffen
6. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg, December 13, 2018 - December 13, 2018)
Jaksch A., Hesse N., Drummer D., Schmidt J.:
Selektives Laserstrahlschmelzen von Kunststoffen: Lokale Bauteileigenschaften in Abhängigkeit unterschiedlicher Alterungszustände des Ausgangspulvers
6. Industriekolloquium des SFB 814 (Nürnberg, December 13, 2018 - December 13, 2018)
In: 6. Industriekolloquium des SFB 814, 2018
Wudy K., Drexler M., Lanzl L., Drummer D.:
Analysis of time dependent thermal properties for high rates in selective laser sintering
In: Rapid Prototyping Journal 24 (2018), p. 894-900
ISSN: 1355-2546
DOI: 10.1108/RPJ-01-2017-0013

Greiner S., Lanzl L., Wudy K., Drexler M., Drummer D.:
Untersuchungen zum Potential der Pulververdichtung durch den Pulverauftrag beim selektiven Laserstrahlschmelzen von Kunststoffen
Rapid Tech 2017 (Erfurt, June 20, 2017 - June 22, 2017)
In: Proceedings of Rapid Tech 2017 2017
Greiner S., Wudy K., Lanzl L., Drummer D.:
Selective laser sintering of polymer blends: Bulk properties and process behavior
In: Polymer Testing 64 (2017), p. 136-144
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2017.09.039

Drexler M., Drummer D., Wudy K.:
Einfluss des Pulverauftragsprozesses auf den selektiven Strahlschmelzprozess thermoplastischer Kunststoffe
RapidTech 2015 (Erfurt, June 10, 2015 - June 11, 2015)
In: Tagungsband / Digital Proceedings RapidTech 2015 2015
Drexler M., Drummer D., Wudy K.:
Interaction between Time Dependent Exposure Strategies and Part Positioning within Selective Laser Melting Process of Plastics
In: International Journal of Recent Contributions from Engineering, Science & IT 3 (2015), p. 13-19
ISSN: 2197-8581
DOI: 10.3991/ijes.v3i1.4286
Drexler M., Lexow M., Drummer D.:
Selective Laser Melting of Polymer Powder - Part Mechanics as Function of Exposure Speed
In: Physics Procedia 78 (2015), p. 328-336
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2015.11.047

Drummer D., Drexler M., Wudy K.:
Derivation of Heating Rate Dependent Exposure Strategies for the Selective Laser Melting of Thermoplastic Polymers
30th Annual Meeting of the Polymer Processing Society (Cleveland, USA)
In: Proceedings of the Polymer Processing Society 30th Annual Meeting 2014
Drummer D., Drexler M., Wudy K.:
Impact of Heating Rate During Exposure of Laser Molten Parts on the Processing Window of PA12 Powder
In: Physics Procedia 56 (2014), p. 184-192
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2014.08.162
Drummer D., Drexler M., Wudy K.:
Resulting melt-pool-shape during selective beam melting of thermoplastics as function of energy input parameters
Fraunhofer Direct Digital Conference 2014 (Berlin)
In: DDMC 2014, Proceedings of the Fraunhofer Direct Digital Manufacturing Conference, Aachen: 2014

Drexler M., Drummer D., Wudy K.:
Effects of the powder bulk density on the porosity of laser molten thermoplastic parts
29th Annual Meeting of the Polymer Processing Society (Nürnberg)
In: Proceedings of the Polymer Processing Society 29th Annual Meeting 2013

Drexler M., Kühnlein F., Drummer D.:
Effects on the density distribution of SLS-parts
Laser Assisted Net Shape Engineering 7 (Fürth)
In: Physics Procedia 39 2012
DOI: 10.1016/j.phpro.2012.10.066
Drexler M., Kühnlein F., Drummer D.:
Influence of powder coating on part density as a function of coating parameters
4th International Conference on Additive Technologies (Maribor)
In: 4th International Conference on Additive Technologies 2012

Rietzel D., Drexler M., Kühnlein F., Drummer D.:
Influence of temperature fields on the processing of polymer powders by means of laser and mask sintering technology
Twenty Second Annual International Solid Freeform Fabrication Symposium An Additive Manufacturing Conference (Austin, August 8, 2011 - August 10, 2011)
In: Twenty Second Annual International Solid Freeform Fabrication Symposium An Additive Manufacturing Conference 2011

2025 (3 Publications)

2024 (7 Publications)

2023 (16 Publications)

2022 (13 Publications)

2021 (2 Publications)

2020 (1 Publication)

2019 (6 Publications)

2018 (5 Publications)

2017 (2 Publications)

2015 (3 Publications)

2014 (3 Publications)

2013 (1 Publication)

2012 (2 Publications)

2011 (1 Publication)